On April 1, 2019 the Regional Transportation District (RTD) announced that the grand opening for the G Line will be on Friday, April 26. The commuter rail will open with quiet zones in place along the entirety of the line, although horns will continue to be used in emergency situations; if maintenance workers, pedestrians or vehicles are on or near the tracks; if there are issues with gate timing at any of the G Line’s 16 crossings; or if a train must use automatic train control.
RTD and the City of Arvada will be providing additional G Line-related information about safety, celebratory events and changes to bus service along the rail corridor as information becomes available. For the most current details, visit RTD’s home page, G Line page and social media platforms.
The railroad crossings along the Regional Transportation District’s (RTD) G Line are fully active and operating along the corridor, which winds through Adams County, Arvada and Wheat Ridge. Freight trains are currently maneuvering through the 16 crossings during most of the day and the G Line commuter rail trains will also start passing through the crossings when it opens for service on April 26, 2019. It is important to understand how each crossing can be navigated, whether you’re driving a vehicle, riding a bicycle or walking through the intersection.
Crossings Along G Line
There are three types of crossings along the G Line: Pre-signal, T-intersection or Traditional, and No Signal
The public will see two traffic signals when approaching the crossing – one before the tracks and one after the tracks just past the east/west roadway (ex: Ridge Road and Grandview). The first signal is called the pre-signal which will turn red before the second signal to make sure traffic stops before proceeding onto the railroad tracks. For traffic that has already preceded onto the railroad tracks, the second signal will stay green to allow for traffic to turn left or right onto the east/west roadway. As long as motorists obey the yellow to red signal change and stop at the large white stop bar on the roadway, this signaling change will allow the flow of traffic to clear the railroad tracks in a safe manner. If a motorist is driving northbound toward a pre-signal crossing, the second signal will have a yellow flashing left arrow that will turn a solid green arrow so that the motorists can clear the railroad tracks while the southbound traffic stops at a red light before entering the intersection.(Lamar St., Independence St., Miller, and Tabor St.)
T intersection or Traditional Crossing
These crossings only have one traffic signal. If a motorist is traveling northbound, the signal will be on the opposite side of the tracks just past the east/west roadway so when there is a red light at that signal, vehicles should stop at the large white stop bar before the railroad tracks. (Saulsbury St., Vance St., Parfet St., and Robb St.)
No Signal Crossing
This type of crossing has no traffic signal. The gate arms and red flashing lights act as a red light and vehicles should stop at the large white stop bar on the roadway when the crossing arms start to come down and the red lights begin to flash. (W. 60th, Lowell, Tennyson St., Olde Wadsworth Blvd., Allyson/Zephyr, Balsam St., Carr St., Garrison St.)
Signs and Stopping Points
In addition, most crossings have pedestrian gates that people walking will need to pull open to cross the tracks. The pedestrian should only pull the gate open when the crossing gate arms are up and the red lights and bells are not activated. Miller Street and Tabor Street crossings do not have any pedestrian gate. The Olde Wadsworth Boulevard and Vance Street crossings have automatic pedestrian gates (they are small versions of the large red and white gate arms).
No matter what pedestrian amenity there is at a crossing, be sure to stop at the pedestrian gate when there is an activation for approaching trains and look both ways before crossing the tracks even if the crossing is not activated. The public is also reminded never to drive around the gate arms when they are down and obey all traffic laws. If you are riding a bicycle, please follow these same safety tips and traffic laws.
Streets with Crossings
|West 60th Ave.||No Signal|
|Olde Wadsworth Blvd.||
RTD and its contractor, Denver Transit Partners (DTP), worked closely with the cities of Arvada and Wheat Ridge and Adams County to design the crossings to be safe for train, vehicle, bicycle and pedestrian traffic and also allow for good vehicle flow on the roadways when trains are not passing through the crossing. Both cities reviewed and approved multiple RTD design and construction packages, which resulted in the layout and traffic signals the public sees at the crossings today.
For more information about the G Line, please visit RTD G Line.